Trunk Lid Stay Disposal

Secure trunk lid stay (1) using a vise (C).
Using hacksaw (A) slowly make 2 holes in the trunk lid stay, in numerical order as shown in the figure.
CAUTION:
- When cutting a hole on trunk lid stay, always cover a hacksaw using a shop cloth (B) to avoid scattering metal fragments or oil.
- Wear eye protection (safety glasses).
- Wear gloves.
  
  Fig 1: Securing Trunk Lid Stay Using Vise
  Courtesy of NISSAN MOTOR CO., U.S.A.
1. 20 mm (0.787 in)
2. Cut at the groove.
  
  Fig 2: Identifying Groove Position
  Courtesy of NISSAN MOTOR CO., U.S.A.