Inspection Procedure

SELF-DIAGNOSIS RESULT CHECK
Check the self-diagnosis results.
SELF-DIAGNOSIS RESULTS

Self-diagnosis results

PNP POS SIG

Is the above displayed in the self-diagnosis display items?

YES: GO TO 2.

NO: Inspection End.
CONNECTOR INSPECTION
1. Disconnect the ABS actuator and electric unit (control unit) and brake fluid level switch connectors.
2. Check the terminals for deformation, disconnection, looseness or damage.
  OK or NG
  
  OK: GO TO 3.
  
  NG: Repair or replace as necessary.
CHECK TRANSMISSION RANGE SWITCH
Perform transmission range switch inspection. Refer to "COMPONENT INSPECTION ".

Is the inspection result normal?

YES: Replace ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".

NO: Repair or replace malfunctioning components.