FixVault
Home › Nissan-Datsun › 2011 › Sentra SE-R › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P1148 To P2A03 (Qr25DE) › DTC P2101 Electric Throttle Control Function › DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 11 V when engine is running  .

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Start engine and let it idle for 5 seconds.
  3. Check DTC.
  4. If DTC is detected, GO TO "DIAGNOSIS PROCEDURE ".
About FixVault