ID Registration Without Transmitter Activation Tool

With the ignition switch in OFF position, connect CONSULT scan tool to the Data Link Connector (DLC). Turn ignition switch to ON position.
Select "START (NISSAN BASED VHCL)".
Touch "BCM" on "SELECT SYSTEM" screen.
Select "AIR PRESSURE MONITOR" on "SELECT WORK ITEM" screen.
Select "WORK SUPPORT" on "SELECT DIAG MODE" screen, and select "ID REGIST". Select "START".

Adjust the tire pressure to the values specified under the appropriate "Sensor ID Registration Tire Pressure Specifications" table below, and drive the vehicle at 25 mph (40 km/h) or more for a few minutes.

Altima, Armada (2013), Maxima (2013), Sentra (2007-12), Titan (2013), Xterra - See Table "A".
All Other Models - See Table "B".

"A" - Sensor ID Registration Tire Pressure Specifications

Tire Position	Tire Pressure - psi (kPa)
Front Left	36 (250)
Front Right	33 (230)
Rear Right	30 (210)
Rear Left	27 (190)

"B" - Sensor ID Registration Tire Pressure Specifications

Tire Position	Tire Pressure - psi (kPa)
Front Left	35 (240)
Front Right	31 (220)
Rear Right	29 (200)
Rear Left	26 (180)

After completing all ID registrations, press "END" to complete the procedure.
Inflate all tires to specification.