FixVault
Home › Nissan-Datsun › 2011 › Sentra SE-R › Repair and Diagnosis › Transmission › Automatic Transmission - CVT : Re0F10A › Service Information › Shift Control System › Adjustment of Transmission Range Switch

Adjustment of Transmission Range Switch

  1. Move shift selector to "N" position.
  2. Remove control cable from manual lever.
  3. Loosen transmission range switch bolts (A). Insert a pin (4 mm) into the adjusting holes (B) on both transmission range switch and manual lever for adjusting the position.
  4. Tighten transmission range switch bolts (A).

    transmission range switch bolts : 5.9 N.m (0.60 kg-m, 52 in-lb) 

    Fig 1: View Of Transmission Range Switch
    G07139219Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Connect control cable on manual lever (B). Refer to "ADJUSTMENT OF CVT POSITION ".
About FixVault