FixVault
Home › Nissan-Datsun › 2011 › Versa Base, Automatic › Repair and Diagnosis › Body & Frame › Windows › Glass & Window System › Service Information › Power Window System › Front Power Window Motor RH Circuit Inspection

Front Power Window Motor RH Circuit Inspection

  1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH OUTPUT SIGNAL
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor RH.
    3. Turn ignition switch ON.
    4. Check voltage between front power window motor RH connector and ground.
      VOLTAGE SPECIFICATION

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      Front power window motor RH: D104 1 Ground UP 0
      DOWN Battery voltage
      2 UP Battery voltage
      DOWN 0
      Fig 1: Checking Voltage Between Front Power Window Motor RH Connector And Ground
      G04895943Courtesy of NISSAN MOTOR CO., U.S.A.

      OK or NG 

      OK: Replace front power window motor RH. Refer to FRONT DOOR GLASS AND REGULATOR .

      NG: GO TO 2.

  2. CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect power window and door lock/unlock switch RH.
    3. Check continuity between rear power window switch RH connector D105 (A) terminals 6, 7 and rear power window motor RH connector D104 (B) terminals 1, 2.

      6 - 1 : Continuity should exist  .

      7 - 2 : Continuity should exist  .

    4. Check continuity between power window and door lock/unlock switch RH connector D105 (A) terminals 6, 7 and ground.

      6 - Ground : Continuity should not exist  .

      7 - Ground : Continuity should not exist  .

      Fig 2: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector D105 (A) Terminals 6, 7 And Ground
      G04895950Courtesy of NISSAN MOTOR CO., U.S.A.

      OK or NG 

      OK: GO TO 3.

      NG: Repair or replace harness.

  3. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH terminals.
      CONTINUITY SPECIFICATION

      Power window and door lock/unlock switch RH Terminals Condition Continuity
      6 11 DOWN No
      Other than above Yes
      7 12 UP No
      Other than above Yes
      Fig 3: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Terminals
      G04927886Courtesy of NISSAN MOTOR CO., U.S.A.

      OK or NG 

      OK: GO TO 4.

      NG: Replace power window and door lock/unlock switch RH. Refer to "REMOVAL AND INSTALLATION ".

  4. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH CIRCUIT
    1. Disconnect main power window and door lock/unlock switch.
    2. Check continuity between main power window and door lock/unlock switch connector and power window and door lock/unlock switch RH connector.
      CONTINUITY SPECIFICATION

      Connector Terminal Connector Terminal Continuity
      A B
      Main power window and door lock/unlock switch: D7 12 Power window and door lock/unlock switch RH: D105 11 Yes
      16 12
      Fig 4: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch And Power Window And Door Lock/Unlock Switch RH Connector
      G06546987Courtesy of NISSAN MOTOR CO., U.S.A.
    3. Check continuity power window main switch connector and ground.
      CONTINUITY SPECIFICATION

      Connector Terminal Ground Continuity
      A
      Main power window and door lock/unlock switch: D7 12 No
      16

      OK or NG 

      OK: Replace main power window and door lock/unlock switch. Refer to "REMOVAL AND INSTALLATION ".

      NG: Repair or replace harness.

About FixVault