FixVault
Home › Nissan-Datsun › 2011 › Versa Base, Automatic › Repair and Diagnosis › Transmission › Automatic Transaxle › Service Information › Preparation › Special Service Tool

Special Service Tool

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

TOOL DESCRIPTION

Tool number
(Kent-Moore No.)
Tool name		 Description
ST2505S001
(J-34301)
Oil pressure gauge set
  1. ST25051001

    (J-34301)

    Oil pressure gauge

  2. ST25052000

    (J-34301)

    Hose

  3. ST25053000

    (J-25695-3)

    Joint pipe

  4. ST25054000

    (J-25695-4)

    Adapter

  5. ST25055000

    (J-25695-5)

    Adapter
G06153984Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring line pressure
ST35325000
(-)
Drift
G06538285Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing LH differential side oil seal (Use with KV31103000)
  1. 215 mm (8.46 in) 
  2. 25 mm (0.98 in) dia  .
  3. M12 X 1.5P 
KV31103000
(J-38982)
Drift
G06538286Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing LH differential side oil seal (Use with ST35325000)
  1. 59 mm (2.32 in) dia  .
  2. 49 mm (1.93 in) dia  .
ST27180001
(J-25726-A)
Puller
G06153985Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing idler gear
  • Removing output gear (HR16DE engine models)

  1. 100 mm (3.94 in) 
  2. 110 mm (4.33 in) 
  3. M8 X 1.25P 
KV31103200
(J-39186)
Clutch spring compressor
G06538288Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing and installing clutch spring retainer assembly
  • Removing and installing cancel cover

  1. 179 mm (7.05 in) 
  2. 76 mm (2.99 in) dia  .
  3. 174 mm (6.85 in) 
ST23540000
(J-25689-A)
Pin punch
G04897531Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing and installing retaining pin of manual plate
  • Installing retaining pin of manual shaft
  • Installing retaining pin of parking rod plate

  1. 2.3 mm (0.091 in) dia  .
  2. 4 mm (0.16 in) dia  .
KV32101000
(J-25689-A)
Pin punch
G04875793Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing lock pin of pinion mate shaft
  1. 4 mm (0.16 in) dia  .
ST33400001
(J-26082)
Drift
G04875788Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing oil pump housing oil seal
  • Installing output gear bearing outer race (HR16DE engine models)

  1. 60 mm (2.36 in) dia  .
  2. 47 mm (1.85 in) dia  .
KV381054S0
(J-34286)
Puller
G04905945Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing radial needle bearing
  • Removing idler gear bearing outer race (HR16DE engine models)
  • Remove output gear bearing outer race (HR16DE engine models)
  • Removal radial needle bearing (MR18DE engine models)
  • Removing differential side bearing outer races (MR18DE engine models)

  1. 250 mm (9.84 in) 
  2. 160 mm (6.30 in) 
ST30031000
(J-22912-01)
Puller
G04901420Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing reduction pinion gear bearing inner race
  1. 90 mm (3.54 in) dia  .
  2. 50 mm (1.97 in) dia  .
ST35272000
(J-26092)
Drift
G05370152Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing reduction pinion gear bearing inner race
  • Installing idler gear bearing inner race
  • Installing output gear bearing inner race (HR16DE engine models)

  1. 72 mm (2.83 in) dia  .
  2. 40 mm (1.57 in) dia  .
  3. 35.5 mm (1.398 in) dia  .
ST37830000
(-)
Drift
G04897534Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing idler gear bearing outer race
  1. 61.9 mm (2.437 in) dia  .
  2. 39 mm (1.54 in) dia  .
ST33200000
(J-26082)
Drift
G06538296Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing differential side bearings (HR16DE engine models)
  1. 60 mm (2.36 in) dia  .
  2. 44.5 mm (1.752 in) dia  .
ST35271000
(J-26091)
Drift
G04897537Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing idler gear
  • Installing output gear (HR16DE engine models)

  1. 72 mm (2.83 in) dia.
  2. 63 mm (2.48 in) dia.
ST3127S000
(J-25765-A)
Preload gauge
  1. GG9103000

    (J-25765-A)

    Torque wrench

  2. HT62940000

    (-)

    Socket adapter

  3. HT62900000

    (-)

    Socket adapter
G04876269Courtesy of NISSAN MOTOR CO., U.S.A.
  • Measuring turning torque of reduction pinion gear
  • Measuring turning torque of output shaft (HR16DE engine models)
  • Measuring turning torque of final drive assembly (MR18DE engine models)
KV38105710
(J-39026)
Preload adapter
G04888833Courtesy of NISSAN MOTOR CO., U.S.A.
  • Selecting differential side bearing adjusting shim (MR18DE engine models)
  • Measuring turning torque of final drive assembly (MR18DE engine models)
ST35321000
(-)
Drift
G04901418Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing output shaft bearing (MR18DE engine models)
  1. 49 mm (1.93 in) dia  .
  2. 41 mm (1.61 in) dia  .
ST30633000
(-)
Drift
G04901418Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing differential side bearing outer races (MR18DE engine models)
  1. 67 mm (2.48 in) dia  .
  2. 49 mm (1.93 in) dia  .
ST3306S001
(J-22888-D)
Differential side bearing puller set
  1. ST33051001

    Puller

  2. ST33061000

    Adapter
G06153995Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing differential side bearing inner race (MR18DE engine models)
  1. 38 mm (1.50 in) dia  .
  2. 28.5 mm (1.122 in) dia  .
  3. 130 mm (5.12 in) 
  4. 135 mm (5.31 in) 
  5. 100 mm (3.94 in) 
About FixVault