A/T Shift Selector Removal and Installation: Installation

Installation is in the reverse order of removal.

• When installing the control cable (1) to the A/T shift selector assembly (2), make sure that the control cable (1) is fully pressed in with the ribbed surface (A) facing downward from the vehicle.
• After installation is completed, adjust and check the A/T position. Refer to "ADJUSTMENT OF A/T POSITION " and "CHECKING OF A/T POSITION ".
  Fig 1: Identifying Control Cable And A/T Shift Selector Assembly

  Courtesy of NISSAN MOTOR CO., U.S.A.