Removal and Installation: Installation

Installation is in the reverse order of removal.

• When tightening bolt (intermediate shaft lower side), tighten it by hand first, and make sure there is no feeling of sticking or galling before final tightening.
  CAUTION: Insert bolt in the proper direction. (Do not insert it from the other side.)
• When connecting intermediate shaft upper side (1) and column shaft, make sure the bolt is securely seated in groove (A) of column shaft before final tightening.
  Fig 1: Connecting Intermediate Shaft Upper Side And Column Shaft

  Courtesy of NISSAN MOTOR CO., U.S.A.