FixVault
Home › Nissan-Datsun › 2012 › 370Z Base, 2D Convertible, Standard Trans › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Control System - System And Component Testing › Fuel Injector › Component Inspection

Component Inspection

  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as follows.
      Terminals Resistance (Ω)
      1 and 2 11.1 - 14.3 [at 10 - 60°C (60 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector.

About FixVault