FixVault
Home › Nissan-Datsun › 2012 › Cube Base › Repair and Diagnosis › Electrical › Body Electrical › Power Control System (Power Distribution System) › Removal And Installation › Push-Button Ignition Switch › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the switch panel finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the push-ignition switch (2) fixing pawl using a flat-blade screwdriver (A), and then remove NATS antenna amp..
    Fig 1: Removing NATS Antenna Amp. & Ignition Switch
    G08129211Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault