FixVault
Home › Nissan-Datsun › 2012 › Cube Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing (Except CALIFORNIA) › Ignition Signal › Component Inspection (Condenser)

Component Inspection (Condenser)

  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
    Terminals Resistance
    1 and 2 Above 1 MΩ [at 25°C (77°F)]

    Is the inspection result normal? 

    YES >> INSPECTION END

    NO >> Replace Condenser.

About FixVault