FixVault
Home › Nissan-Datsun › 2012 › Cube Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing (Except CALIFORNIA) › Periodic Maintenance › Fuel Pressure › Inspection › Fuel Pressure Release › Without CONSULT

Without CONSULT

  1. Remove fuel pump fuse located in IPDM E/R.
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
About FixVault