FixVault
Home › Nissan-Datsun › 2012 › Cube Base › Repair and Diagnosis › External Pages › Different car › Section 89 (Climate Control) › Outside Air Temperature Sensor Replacement

Outside Air Temperature Sensor Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bulkhead cover (see FRONT BULKHEAD COVER REPLACEMENT ).
  2. Lift the tab (A) to release the lock, then remove the outside air temperature sensor (B) from the back of the front bumper. Disconnect the 2P connector (C) from the outside air temperature sensor.
    Fig 1: Locating Tab, Outside Air Temperature Sensor And 2P Connector
    G08058034Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the sensor in the reverse order of removal.
About FixVault