FixVault
Home › Nissan-Datsun › 2012 › Frontier PRO-4X, 4D Pickup, Automatic Trans › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing (VQ40DE) › ASCD Brake Switch › Component Inspection › ASCD Clutch Switch

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist
    Fig 1: Checking ASCD Clutch Switch
    G08134270Courtesy of NISSAN NORTH AMERICA, INC.

    If NG, adjust ASCD clutch switch installation, refer to "ON-VEHICLE INSPECTION AND ADJUSTMENT ", and perform step  3 again.

About FixVault