| 1. |
Power switch |
Refer to
"POWER SWITCH ". |
| 2. |
IPDM E/R |
- IPDM E/R detects power switch (push switch) status, and transmits power switch (push switch) status signal (CAN) to BCM.
- IPDM E/R receives ignition relay (IPDM E/R) control signal and power switch ON signal (CAN) from BCM, and controls ignition relay (built in IPDM E/R)
Refer to
"COMPONENT PARTS LOCATION
" for detailed installation location. |
| 3. |
Stop lamp switch |
Stop lamp switch detects that brake pedal is depressed, and transmits the signal to BCM. Refer to
"COMPONENT PARTS LOCATION
" for detailed installation location. |
| 4. |
BCM |
- BCM controls power distribution system.
- BCM judges power supply position by power switch (push switch) and vehicle condition
- BCM checks the power supply position internally.
Refer to
"BODY CONTROL SYSTEM: COMPONENT PARTS LOCATION
" for detailed installation location. |
| 5. |
Accessory relay |
- Accessory relay is controlled by BCM.
- Accessory relay supplies the accessory power supply or the power switch ACC signal to each ECU when power switch is turned ACC or ON.
- BCM compares status of accessory relay control signal, and power supply position judged by BCM.
|
| 6. |
Ignition relay |
- Ignition relay (built in fuse block) is controlled by BCM.
- Ignition relay (built in fuse block) supplies the power switch ON power supply or the power switch ON signal to each ECU when power switch is turned ON.
- BCM compares status of ignition relay (built in fuse block) control signal and power supply position judged by BCM.
|
| 7. |
Electric shift control module |
Electric shift control module transmits P position signal and P/N position signal to BCM. Refer to
"COMPONENT PARTS LOCATION
" for detailed installation location. |