| Deceleration G changes. |
The amount of regeneration is limited. |
Traction motor inverter limits output. |
Fail-safe of traction motor inverter. |
"FAIL-SAFE
" |
| The temperature of traction motor or traction motor inverter is high. |
Check the "POWER LIMIT CAUSE" in the DATA MONITOR of VCM. |
| LBC limits output. |
Fail-safe of LBC. |
"FAIL-SAFE
" (without Li-ion battery heater),
"FAIL-SAFE
" (without Li-ion battery heater). |
| Damaged bus bar (connecting part of Li-ion battery module). |
Check bus bar. |
| Degradation in Li-ion battery temperature |
Check the "POWER LIMIT CAUSE" in the DATA MONITOR of VCM. |
| The temperature of Li-ion battery is too high/low. |
| Li-ion battery is fully charged. |
Normal operation. |
| The amount of target regeneration changes. |
Selector lever range position is changed. |
Range changes from D to ECO or from ECO to D. |
Normal operation. |
| - |
Accelerator pedal is depressed. |
Normal operation. |