Component Inspection
- CHECK FUEL TANK TEMPERATURE SENSOR
- Turn ignition switch OFF.
- Remove fuel level sensor unit. Refer to "EXPLODED VIEW ".
- Check resistance between "fuel level sensor unit and fuel pump" terminals by heating with hot water as shown in the figure.
Terminals Condition Resistance 4 and 5 Temperature [°C (°F)] 20 (68) 2.3 - 2.7 kΩ 50 (122) 0.79 - 0.90 kΩ Courtesy of NISSAN NORTH AMERICA, INC.
Is the inspection result normal?
YES: INSPECTION END
NO: Replace "fuel level sensor unit and fuel pump". Refer to REMOVAL AND INSTALLATION .