FixVault
Home › Nissan-Datsun › 2012 › Murano CrossCabriolet › Repair and Diagnosis › Engine Performance › System › Engine Control System - Introduction (CROSSCABRIOLET) › Basic Inspection › Fuel Pressure › Work Procedure › Fuel Pressure Release › With CONSULT

With CONSULT

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT.
  3. Start engine.
  4. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
  5. Turn ignition switch OFF.
About FixVault