FixVault
Home › Nissan-Datsun › 2012 › Quest SL › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P1550 To P2A03 › DTC P1572: ASCD Brake Switch › Component Function Check

Component Function Check

  1. PERFORM COMPONENT FUNCTION CHECK
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connectors.
      ECM Condition Voltage
      Connector + -
      Terminal Terminal
      E16 126 (ASCD brake switch signal) 128 Brake pedal Slightly depressed Approx. 0 V
      Fully released Battery voltage

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: GO TO 2.

  2. PERFORM COMPONENT FUNCTION CHECK-II

    Check the voltage between ECM harness connectors.

    ECM Condition Voltage
    Connector + -
    Terminal Terminal
    E16 122 (Stop lamp switch signal) 128 Brake pedal Slightly depressed Battery voltage
    Fully released Approx. 0 V

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

About FixVault