CVT CONTROL SYSTEM: Fail-safe: Description

TCM has a fail-safe mode. The mode functions so that operation can be continued even if the signal circuit of the main electronically controlled input/output parts is damaged.

DTC	Conditions of vehicle	Vehicle behavior
P0615	-	Does not start the engine
P0703	-	Start is slow Acceleration is slow
P0705	-	Selector shock is large Start is slow Acceleration is slow "L" position cannot be recognized Lock-up is not performed Shift position indicator on combination meter is not displayed
P0710	Engine coolant temperature when engine starts is 10°C (50°F) or more.	Acceleration is slow
	Engine coolant temperature when engine starts is less than 10°C (50°F).	Start is slow Acceleration is slow Vehicle speed is not increased
	Engine coolant temperature when engine starts is less than -35°C (-31°F).	Vehicle speed is not increased
P0715	-	Acceleration is slow Restart is slow after stopping with strong deceleration "L" position cannot be recognized Lock-up is not performed
P0720	-	Start is slow Acceleration is slow Restart is slow after stopping with strong deceleration "L" position cannot be recognized Lock-up is not performed
P0725	-	Lock-up is not performed
P0740	-	Selector shock is large Lock-up is not performed
P0744	-	Lock-up is not performed
P0745	-	-
P0746	-	Start is slow Acceleration is slow Lock-up is not performed
P0746	Function deterioration is remarkable after detection of malfunction	Start is difficulty Driving is difficulty Lock-up is not performed
P0776	-	-
P0778	-	Vehicle speed is not increased
P0840	-	Start is slow Acceleration is slow
P0841	-	Start is slow Acceleration is slow
P0845	-	Start is slow Acceleration is slow
P0868	-	Start is slow Acceleration is slow
P1701	-	Start is slow Acceleration is slow
P1705	-	Acceleration is slow Lock-up is not performed
P1709	-	Start is slow Acceleration is slow Shift position indicator (P, N) is not displayed, or is displayed with delay
P1722	-	Lock-up is not performed in coast condition
P1723	When detected malfunction of primary speed sensor	Acceleration is slow Restart is slow after stopping with strong deceleration "L" position cannot be recognized Lock-up is not performed
P1723	When detected malfunction of secondary speed sensor	Start is slow Acceleration is slow Restart is slow after stopping with strong deceleration "L" position cannot be recognized Lock-up is not performed
P1726	-	Acceleration is slow
P1740	-	Selector shock is large Lock-up is not performed
P1777	When detected malfunction of low side (stop the vehicle)	Vehicle speed is not increased Lock-up is not performed
P1777	When detected malfunction of high side (driving the vehicle)	Start is slow Acceleration is slow Lock-up is not performed
U1000	-	Start is slow Acceleration is slow Vehicle speed is not increased
U1010	-	Start is slow Acceleration is slow Vehicle speed is not increased