FixVault
Home › Nissan-Datsun › 2012 › Sentra Base, Automatic CVT Trans › Repair and Diagnosis (Single Page) › Engine Performance › System › Engine Control System - Component Testing (MR20DE) (CALIFORNIA) › Fuel Injector › Component Inspection › Fuel Injector

Fuel Injector

  1. Disconnect fuel injector harness connector.
  2. Check resistance between terminals as shown in the figure.

    Resistance: 11.1 - 14.3 Ω [at 10 - 60°C (50 - 140°F)] 

    Fig 1: Checking Resistance Between Terminals
    G04925628Courtesy of NISSAN NORTH AMERICA, INC.
  3. If NG, replace fuel injector. Refer to , "REMOVAL AND INSTALLATION ".
About FixVault