Accelerator Pedal Position Sensor

Check voltage between ECM terminals 110 (APP sensor 1 signal), 103 (APP sensor 2 signal) and ground under the following conditions.

Terminal	Accelerator pedal	Voltage
110 (Accelerator pedal position sensor 1)	Fully released	0.6 - 0.9 V
110 (Accelerator pedal position sensor 1)	Fully depressed	3.9 - 4.7 V
103 (Accelerator pedal position sensor 2)	Fully released	0.3 - 0.6 V
103 (Accelerator pedal position sensor 2)	Fully depressed	1.95 - 2.4 V

Fig 1: Checking Voltage Between ECM Terminals 110, 103 And Ground

Courtesy of NISSAN NORTH AMERICA, INC.

If NG, replace accelerator pedal assembly and go to next step. Refer to ACCELERATOR CONTROL SYSTEM .