FixVault
Home › Nissan-Datsun › 2012 › Sentra SE-R › Repair and Diagnosis › Body & Frame › Seats › Service Information › Front Seat › Removal and Installation › Removal

Removal and Installation: Removal

  1. Disconnect the negative and the positive battery terminals and wait at least three minutes.
  2. Remove the seat assembly bolts on the back side of the front seat.
  3. Remove the seat assembly bolts on the front side of the front seat
  4. Disconnect the body harness connector(s), then release the harness clips from the seat assembly.
  5. Remove the front seat assembly from the vehicle.
    NOTE: Before removing the seat assembly from the vehicle, adjust the seatback to the upright position.
About FixVault