Transmitter Wake Up Operation
- With the ignition switch in OFF position, connect scan tool to the Data Link Connector (DLC). Turn ignition switch to ON position.
- Display "WORK SUPPORT" screen, and select "ID REGIST".
- With the Transmitter Activation Tool (J-45295) pushed against the left front tire air-valve, press the button for 5 seconds. See Figure. Sensor activation must be performed in the specified order: left front, right front, right rear, left rear.
- As each sensor ID is activated, the TPMS warning light flashes in the pattern shown below, and the activator tool LED changes from red to green.
- Left Front: 1 Blink
- Right Front: 2 Blinks
- Right Rear: 3 Blinks
- Left Rear: 4 Blinks
- All Tires Completed: 1 Long Blink
- Check that the hazard warning lights blink twice when the transmitter wake-up procedure for all wheels is completed.
- After completing wake up of all transmitters, make sure TPMS warning light goes out.