Adjustment of Transmission Range Switch

Move shift selector to "N" position.
Remove control cable from manual lever.
Loosen transmission range switch bolts (A). Insert a 4mm pin into the adjusting holes (B) on both transmission range switch and manual lever for adjusting the position.
Tighten transmission range switch bolts (A).
Transmission range switch bolts (A): 5.9 N.m (0.60 kg-m, 52 in-lb)

Fig 1: Identifying Transmission Range Switch Bolts And Adjusting Holes
Courtesy of NISSAN NORTH AMERICA, INC.
Connect control cable on manual lever. Refer to "ADJUSTMENT OF CVT POSITION ".