Data Monitor
Operation Procedure
- Connect "CONSULT."
- Touch "DATA MONITOR".
- Select from "SELECT MONITOR ITEM", screen of data monitor mode is displayed.
NOTE:
When malfunction is detected, CONSULT performs REAL-TIME DIAGNOSIS.
Also, any malfunction detected while in this mode will be displayed at real time.
Also, any malfunction detected while in this mode will be displayed at real time.
DISPLAY ITEM LIST
| x: Standard -: Not applicable | ||||
|---|---|---|---|---|
| Monitored item (Unit) | Monitor item selection | Remarks | ||
| ECU INPUT SIGNALS | MAIN SIGNALS | SELECTION FROM MENU | ||
| VHCL/S SEN.FR [km/h] or [mph] | x | - | x | Wheel speed calculated by ABS actuator and electric unit (control unit). Signal input with CAN communication line. |
| VHCL/S SEN.RR [km/h] or [mph] | x | - | x | Wheel speed calculated by TCM. Signal input with CAN communication line. |
| ENGINE SPEED [rpm] | x | - | x | Engine speed is displayed. Signal input with CAN communication line. |
| BATTERY VOLT [V] | x | - | x | Power supply voltage for transfer control unit. |
| 2WD SWITCH [On/Off] | x | - | x | 4WD shift switch signal status is displayed. (4L means 4LO of 4WD shift switch.) |
| 4H SWITCH [On/Off] | x | - | x | |
| 4L SWITCH [On/Off] | x | - | x | |
| 4L POSI SW [On/Off] | x | - | x | 4LO switch signal status is displayed. |
| ATP SWITCH [On/Off] | x | - | x | ATP switch signal status is displayed. |
| WAIT DETCT SW [On/Off] | x | - | x | Wait detection switch signal status is displayed. |
| 4WD MODE [2H/4H/4L] | - | x | x | Control status of 4WD recognized by transfer control unit. (2WD, 4H or 4LO) |
| VHCL/S COMP [km/h] or [mph] | - | x | x | Vehicle speed recognized by transfer control unit. |
| SHIFT ACT 1 [On/Off] | - | x | x | Output condition to actuator motor (clockwise) |
| SHIFT AC MON1 [On/Off] | - | - | x | Check signal for transfer control unit signal output |
| SHIFT ACT 2 [On/Off] | - | x | x | Output condition to actuator motor (counterclockwise) |
| SHIFT AC MON2 [On/Off] | - | - | x | Check signal for transfer control unit signal output |
| SFT ACT/R MON [On/Off] | - | - | x | Operating condition of actuator motor relay (integrated in transfer control unit) |
| SHIFT POS SW1 [On/Off] | x | - | x | Condition of actuator position switch 1 |
| SHIFT POS SW2 [On/Off] | x | - | x | Condition of actuator position switch 2 |
| SHIFT POS SW3 [On/Off] | x | - | x | Condition of actuator position switch 3 |
| SHIFT POS SW4 [On/Off] | x | - | x | Condition of actuator position switch 4 |
| 4WD FAIL LAMP [On/Off] | - | x | x | Control status of 4WD warning lamp is displayed. |
| 2WD IND [On/Off] | - | - | x | Control status of 4WD shift indicator lamp (rear) is displayed. |
| 4H IND [On/Off] | - | - | x | Control status of 4WD shift indicator lamp (front and center) is displayed. |
| 4L IND [On/Off] | - | - | x | Control status of 4LO indicator lamp is displayed. |