FixVault
Home › Nissan-Datsun › 2013 › 370Z Base, 2D Convertible, Automatic Trans › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Control System - Component Testing › S-Mode Switch › Component Inspection

Component Inspection

  1. CHECK S-MODE SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect S-MODE switch harness connector.
    3. Check the continuity between S-MODE switch terminals under the following conditions.
      Terminals Condition Continuity
      1 and 2 S-MODE switch Pressed Existed
      Released Not Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace S-MODE switch.

About FixVault