FixVault
Home › Nissan-Datsun › 2013 › Altima Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing (Qr25DE) (Sedan) › Fuel Injector › Component Inspection

Component Inspection

  1. CHECK FUEL INJECTOR 
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      Fuel injector Resistance
      + -
      Terminal
      1 2 11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)]

      Is the inspection result normal? 

      YES >> INSPECTION END

      NO >> Replace malfunctioning fuel injector. Refer to "REMOVAL AND INSTALLATION ".

      Fig 1: Checking Resistance Between Fuel Injector Terminals
      G08682462Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault