FixVault
Home › Nissan-Datsun › 2013 › Altima Base › Repair and Diagnosis › External Pages › Different car › Section 131 (Steering Control System) › DTC/Circuit Diagnosis › EPS Warning Lamp › Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THE ILLUMINATION OF THE EPS WARNING LAMP 

    Check that the EPS warning lamp turns ON when ignition switch turns ON. Then, EPS warning lamp turns OFF after the engine is started.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Perform trouble diagnosis. Refer to "DIAGNOSIS PROCEDURE ".

About FixVault