Component Inspection (Fuel Injector Relay)
- CHECK FUEL INJECTOR RELAY
- Turn ignition switch OFF.
- Remove fuel injector relay.
- Check the continuity between fuel heater relay terminals as per the following conditions.
Fuel injector relay Conditions Continuity + - Terminal 3 5 12 V direct current supply between terminals 1 and 2 Existed No current supply Not existed 6 7 12 V direct current supply between terminals 1 and 2 Existed No current supply Not existed Courtesy of NISSAN NORTH AMERICA, INC.
Is the inspection result normal?
YES: INSPECTION END
NO: Replace fuel injector relay.