FixVault
Home › Nissan-Datsun › 2013 › Maxima S › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System › DTC/Circuit Diagnosis › Power Window Lock Switch › Component Inspection

Component Inspection

  1. CHECK POWER WINDOW LOCK SWITCH 
    1. Disconnect main power window and door lock/unlock switch connectors.
    2. Check continuity between main power window and door lock/unlock switch (lock operation).
      Terminal Main power window and door lock/unlock switch condition Continuity
      3 17 Rear LH UP No
      5 Rear RH
      1 Rear LH NEUTRAL
      3
      5 Rear RH
      7
      1 Rear LH DOWN
      7 Rear RH
    3. Check continuity between main power window and door lock/unlock switch (unlock operation).
      Terminal Main power window and door lock/unlock switch condition Continuity
      3 17 Rear LH UP Yes
      5 Rear RH
      1 Rear LH NEUTRAL
      3
      5 Rear RH
      7
      1 Rear LH DOWN
      7 Rear RH

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace main power window and door lock/unlock switch. Refer to "REMOVAL AND INSTALLATION ". After that, refer to "SPECIAL REPAIR REQUIREMENT "

About FixVault