Removal and Installation: Removal

Remove the front door grip cover. Refer to "REMOVAL AND INSTALLATION ".
Remove the clip (A) from the door grip using a suitable tool.
CAUTION: Wrap a cloth around suitable tool to protect components from damage.

Fig 1: Locating Door Grip Mounting Clip
Courtesy of NISSAN NORTH AMERICA, INC.
Release the metal clip and lift the main power window and door lock/unlock switch (2) and finisher (1) as an assembly starting from the rear using a suitable tool, pull upward to remove it from the front door finisher.

Fig 2: Locating Main Power Window And Door Lock/Unlock Switch Clip And Finisher Pawl
Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Wrap a cloth around suitable tool to protect components from damage.
Disconnect the harness connector from the main power window and door lock/unlock switch.
Release the pawls on each side to separate the switch finisher (1) from the main power window and door lock/unlock switch (2).
CAUTION: Do not damage the pawl of the switch finisher.