Work Procedure

1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. "TIRE AIR PRESSURE ".

   : GO TO 2.

With CONSULT

1. Turn ignition switch ON.
   CAUTION: Never start engine.
2. Select "Work Support" mode in "ENGINE.
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
   CAUTION: Never swing the vehicle during "G sensor calibration".

   Is "COMPLETED" displayed? 

   YES: END

   NO: Perform steps  1 and  2 again.