FixVault

Component Inspection

  1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH 
    1. Turn power switch OFF.
    2. Disconnect power window and door lock/unlock switch RH connector.
    3. Check power window and door lock/unlock switch RH terminals under the following conditions.
      Front power window and door lock/unlock switch RH Condition Continuity
      Terminal
      8 7 UP Yes
      11 6
      11 6 NEUTRAL
      12 7
      8 6 DOWN
      12 7

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace power window and door lock/unlock switch RH. Refer to "REMOVAL AND INSTALLATION ".