FixVault
Home › Nissan-Datsun › 2014 › Maxima S › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing › Ignition Signal › Component Inspection (Condenser)

Component Inspection (Condenser)

  1. CHECK CONDENSER 
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      Terminals Resistance
      1 and 2 Above 1 MΩ [at 25C° (77C°)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace condenser.

      Fig 1: Checking Resistance Between Condenser-2 Terminals 1 And 2
      G04875488Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault