FixVault
Home › Nissan-Datsun › 2014 › Maxima S › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0196 To P0607 › DTC P0196: EOT Sensor › Component Inspection

Component Inspection

  1. CHECK ENGINE OIL TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect engine oil temperature sensor harness connector.
    3. Remove engine oil temperature sensor.
    4. Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure.
      Terminals Condition Resistance
      1 and 2 Temperature [°C (°F)] 20 (68) 2.1 - 2.9 kΩ
      50 (122) 0.68 - 1.00 kΩ
      90 (194) 0.236 - 0.260 kΩ
      Fig 1: Checking Resistance Between Engine Coolant Temperature Sensor Terminals 1 And 2
      G04874991Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace engine oil temperature sensor. Refer to "COMPONENT PARTS LOCATION "

About FixVault