Moving Object Detection System Operation Description
- Around view monitor control unit enables Moving Object Detection system.
- Combination meter turns Moving Object Detection ON indicator lamp ON/OFF according to the signals from around view monitor control unit via CAN communication.
- Around view monitor control unit starts the control as follows, based on a vehicle detection signal.
Operation Condition of Moving Object Detection System
Around view monitor control unit performs the control when the following conditions are satisfied:
- Moving Object Detection ON indicator: ON
- When the vehicle is moving in R (reverse) at 5 MPH (8 km/h) or less.NOTE:
- When the Moving Object Detection system setting on the Vehicle Information Display is ON.
- Moving Object Detection braking will not operate or will stop operating and only a warning chime will sound under the following conditions:
- When driving with a tire that is not within normal tire conditions (pressure, wear, chain, spare, etc.)
- When the vehicle is equipped with non-original brake parts or suspension parts.
- Do not use the MOD system when towing a trailer.
- Excessive noise such as the audio system will interfere with the chime sound, and it may not be heard.