Work Procedure
- STEP 1
Insert the first key into the ignition cylinder.
: GO TO 2.
- STEP 2
Turn ON the ignition switch.
: GO TO 3.
- STEP 3
Check that the security indicator flashes 5 times after the ignition is turned ON.
: GO TO 4.
- STEP 4
Turn the ignition switch OFF for a minimum of 3 seconds.
: GO TO 5.
- STEP 5
The first key has been registered.
: GO TO 6.
- STEP 6
Remove the first key and insert the next key to be registered.
: GO TO 7.
- STEP 7
Repeat steps 2, 3 and 4 for each additional key.
: Registration End.