ECM: Work Procedure
WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS
Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
: GO TO 2.
- PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to "WORK PROCEDURE ".
: GO TO 3.
- PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Refer to "WORK PROCEDURE ".
: GO TO 4.
- PERFORM IDLE AIR VOLUME LEARNING
Refer to "WORK PROCEDURE ".
: END