FixVault
Home › Nissan-Datsun › 2014 › Rogue Select AWD › Repair and Diagnosis › Transmission › Transfer Case › DTC/Circuit Diagnosis › AWD Lock Switch › Component Inspection

Component Inspection

  1. CHECK AWD LOCK SWITCH 
    1. Turn the ignition switch OFF.
    2. Remove AWD lock switch.
    3. Check the continuity between AWD lock switch connector terminals.
      AWD lock switch Condition Continuity
      Terminal
      1 3 When releasing AWD lock switch. Not existed
      When AWD lock switch is hold pressed. Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace AWD lock switch.

About FixVault