FixVault

DRIVER SIDE: Component Inspection

  1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor (driver side) connector.
    3. Check motor operate by connecting the battery voltage directly to front power window motor (driver side) connector.
      Front power window motor (driver side) connector Terminal Motor condition
      (+) (-)
      D7 1 2 DOWN
      2 1 UP

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace front power window motor (driver side). Refer to "REMOVAL AND INSTALLATION ".