FixVault
Home › Nissan-Datsun › 2014 › Sentra SL › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System › Removal And Installation › Power Window And Door Lock/Unlock Switch RH › Removal and Installation › Removal

Removal and Installation: Removal

  1. Release the pawls using a suitable tool and lift the power window and door lock/unlock switch RH and finisher as an assembly and remove.
  2. Disconnect the harness connector from the power window and door lock/unlock switch RH.
  3. Release the four pawls (two on each side) using a suitable tool, then separate the main power window and door lock/unlock switch RH (1) from the main power window and door lock switch RH finisher (2).
    Fig 1: Identifying Door Lock Switch RH And Finisher
    G09460276Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not bend back the pawls on the switch finisher too far or breakage may occur.
About FixVault