Work Procedure

1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. "TIRE AIR PRESSURE ".

   : GO TO 2.

With CONSULT 

1. Turn ignition switch ON.
   CAUTION: Never start engine.
2. Select "Work Support" in "TRANSMISSION".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
   CAUTION: Never swing the vehicle during "G sensor calibration".

   Is "COMPLETED" displayed? 

   YES: GO TO 3.

   NO: Perform steps  1 and  2 again.

With CONSULT 

1. Turn ignition switch OFF and wait for 10 seconds.
2. Turn ignition switch ON.
3. Select "Self Diagnostic Results" in "TRANSMISSION".

   Is "P1586" or "P1588" detected? 

   YES: Go to "DTC INDEX ".

   NO: Calibration end