Work Procedure: Inspection

Check the engine oil level. Replenish if necessary. "INSPECTION ".
Check for leak of the CVT fluid. Refer to "INSPECTION ".
Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temperature is 50 to 80°C (122 to 176°F).
Be sure to apply the parking brake and block the tires.
Start the engine.
Select "Data Monitor" in "TRANSMISSION".
Select "LINE PRESSURE".
Measure the line pressure at both idle and the stall speed.
CAUTION: Keep brake pedal pressed all the way down during measurement.

Line pressure: Refer to "LINE PRESSURE ".