Detailed Flow

INTERVIEW FOR MALFUNCTION

It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

NOTE:
The customers are not professionals. Never assume that "maybe the customer means•••" or "maybe the customer mentioned this symptom".

GO TO STEP 2.

SELF - DIAGNOSIS WITH CONSULT
1. Perform "All DTC Reading".
2. Check for DTC detected in "Self Diagnostic Result" of the following:
  - "DISTANCE SENSOR"
  - "AROUND VIEW MONITOR"
Is any DTC detected?

YES

GO TO STEP 5.

NO

GO TO STEP 3.

ACTION TEST

Perform the following system action test to check the system operation:
- LDW refer to DESCRIPTION .
- BSW refer to DESCRIPTION .
- MOD refer to DESCRIPTION .
Check if any other malfunctions occur.

GO TO STEP 4.

SYMPTOM DIAGNOSIS

Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to SYMPTOM TABLE .

GO TO STEP 6.

TROUBLE DIAGNOSIS BY DTC

Perform trouble diagnosis for detected DTC of the following:
- "DISTANCE SENSOR": Refer to DTC INDEX .
- "AROUND VIEW MONITOR": Refer to DTC INDEX .
GO TO STEP 6.

MALFUNCTIONING PART REPAIR

Repair or replace the identified malfunctioning parts.

GO TO STEP 7.

REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
1. Erase "Self Diagnostic Result".
2. Perform "All DTC Reading" again after repairing or replacing the specific items.
3. Check if any DTC is detected in "Self Diagnostic Result" of the following:
  - "DISTANCE SENSOR"
  - "AROUND VIEW MONITOR"
Is any DTC detected?

YES

GO TO STEP 5 .

NO

GO TO STEP 8.

REPAIR CHECK (ACTION TEST)

Perform the following system action test. Check that the malfunction symptom is solved or no other symptoms occur.

Is there a malfunction symptom?

YES

GO TO STEP 4

NO

Inspection End.