Work Procedure

STEP 1

Insert the first key into the ignition cylinder.

GO TO STEP 2 .

STEP 2

Turn ON the ignition switch.

GO TO STEP 3 .

STEP 3

Check that the security indicator flashes 5 times after the ignition is turned ON.

GO TO STEP 4 .

STEP 4

Turn the ignition switch OFF for a minimum of 3 seconds.

GO TO STEP 5 .

STEP 5

The first key has been registered.

GO TO STEP 6 .

STEP 6

Remove the first key and insert the next key to be registered.

GO TO STEP 7 .

STEP 7

Repeat steps 2, 3 and 4 for each additional key.

Registration End .