Active Test
WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.
The active test is used to determine and identify details of a malfunction, based on self-diagnosis test results and data obtained in the DATA MONITOR. In response to instructions from CONSULT, instead of those from chassis control module on the vehicle, a drive signal is sent to the actuator to check its operation.
CAUTION:
- Never perform ACTIVE TEST while driving the vehicle.
- Always bleed air from brake system before active test.
- Never perform active test when system is malfunctioning.
NOTE:
- When active test is performed while depressing the brake pedal, the brake pedal depressing stroke may change. This is not a malfunction.
- During an active test, sometimes a chassis control warning is displayed and the master warning lamp illuminates on the information display in the combination meter; however, this is not a malfunction.
| Test item | Operation | Description |
|---|---|---|
| BRAKE ACTUATOR 1 MODE 1 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 1 MODE 2 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 1 MODE 3 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 2 MODE 1 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 2 MODE 2 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 2 MODE 3 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 3 MODE 1 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 3 MODE 2 | Start | Controls brake fluid pressure. |
| BRAKE ACTUATOR 3 MODE 3 | Start | Controls brake fluid pressure. |
| MASTER WARNING ACTIVE | On | If touching "On" with the master warning lamp not illuminated, the master warning lamp illuminates. Stops in approximately 1 minute. |
| Off | The master warning lamp turns OFF. (vehicle in normal state) | |
| FL TIRE DISP | On | Displays the front LH tire on the information display in the combination meter. |
| Off | Does not display the front LH tire on the information display in the combination meter. | |
| FR TIRE DISP | On | Displays the front RH tire on the information display in the combination meter. |
| Off | Does not display the front RH tire on the information display in the combination meter. | |
| RL TIRE DISP | On | Displays the rear LH tire on the information display in the combination meter. |
| Off | Does not display the rear LH tire on the information display in the combination meter. | |
| RR TIRE DISP | On | Displays the rear RH tire on the information display in the combination meter. |
| Off | Does not display the rear RH tire on the information display in the combination meter. | |
| TURN DISP | NO DISP | Does not display the turning status on the information display in the combination meter. |
| LH | Displays the LH turning status on the information display in the combination meter. | |
| RH | Displays the RH turning status on the information display in the combination meter. | |
| ROUND | Displayed but not used. | |
| ATC 1 DISP | On | Displays active trace control function active status on the information display in the combination meter. |
| Off | Displays active trace control function inactive status on the information display in the combination meter. | |
| ATC 2 DISP | On | Displays active trace control function active status on the information display in the combination meter. |
| Off | Displays active trace control function inactive status on the information display in the combination meter. | |
| HDC DISP | On | Displays Hill Descent Control active status on the information display on the combination meter. |
| Off | Displays Hill Descent Control inactive status on the information display on the combination meter. | |
| BRAKE HOLD DISP | INACT | Displays inactive status of controls on the information display on the combination meter. |
| READY | Displays ready status of Hill Start Assist on the information display on the combination meter. | |
| ACTIVE | Displays active status of Hill Start Assist on the information display on the combination meter. | |
| ERROR | Displays inactive status of controls on the information display on the combination meter. | |
| AEB DISP | On | Displays Active Engine Brake (corner) active status on the information display in the combination meter. |
| Off | Displays Active Engine Brake (corner) inactive status on the information display in the combination meter. | |
| VEHICLE DISP | On | Displays Active Ride Control (brake) active status on the information display in the combination meter. |
| Off | Displays Active Ride Control (brake) inactive status on the information display in the combination meter. | |
| INTERRUPT DISP | NO REQ | Displays inactive status of controls on the information display in the combination meter. |
| READY | Displays ready status of Hill Start Assist on the information display in the combination meter. | |
| ACTIVE | Displays active status of Hill Start Assist on the information display in the combination meter. | |
| HDC | Displays Hill Descent Control active status on the information display in the combination meter. | |
| ATC 3 DISP | On | Displays active trace control function active status on the information display in the combination meter. |
| Off | Displays active trace control function inactive status on the information display in the combination meter. |