Data Monitor
WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitored item [Unit] |
Description |
|---|---|
| BRAKE SW [On/Off] |
Indicates [ON/OFF] status as judged from brake switch signal (ECM transmits brake switch signal through CAN communication). |
| STOP LAMP SW [On/Off] |
Indicates [ON/OFF] status as judged from stop lamp switch signal (ECM transmits stop lamp switch signal through CAN communication). |
| IDLE SW [On/Off] |
Indicates [ON/OFF] status of idle switch read from ADAS control unit through CAN communication (ECM transmits ON/OFF status through CAN communication). |
| VHCL SPEED SE [km/h] or [mph] |
Indicates vehicle speed calculated from ADAS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication]. |
| SET VHCL SPD [km/h] or [mph] |
Indicates set vehicle speed memorized in ADAS control unit. |
| BUZZER O/P [On/Off] |
Indicates [ON/OFF] status of warning chime output. |
| ENGINE RPM [RPM] |
Indicates engine speed read from ADAS control unit through CAN communication (ECM transmits engine speed signal through CAN communication). |
| WIPER SW [OFF/LOW/HIGH] |
Indicates wiper [OFF/LOW/HIGH] status (BCM transmits front wiper request signal through CAN communication). |
| BA WARNING [On/Off] |
Indicates [ON/OFF] status of FEB indicator lamp output. |
| D POSITION SW [On/Off] |
Indicates [ON/OFF] status of "D" or "M" positions read from ADAS control unit through CAN communication; ON when position "D" or "M" (TCM transmits shift selector position signal through CAN communication). |
| NP RANGE SW [On/Off] |
Indicates shift selector position signal read from ADAS control unit through CAN communication (TCM transmits shift selector position signal through CAN communication). |
| PKB SW [On/Off] |
Parking brake switch status [ON/OFF] judged from the parking brake switch signal that ADAS control unit receives via CAN communication is displayed (combination meter transmits the parking brake switch signal via CAN communication). |
| PWR SUP MONI [V] |
Indicates ignition voltage input monitored by ADAS control unit. |
| VHCL SPD AT [km/h] or [mph] |
Indicates vehicle speed calculated from CVT vehicle speed sensor read from ADAS control unit through CAN communication (TCM transmits CVT vehicle speed sensor signal through CAN communication). |
| THRTL OPENING [%] |
Indicates throttle position read from ADAS control unit through CAN communication (ECM transmits accelerator pedal position signal through CAN communication). |
| GEAR [1, 2, 3, 4, 5, 6, 7] |
Indicates CVT gear position read from ADAS control unit through CAN communication (TCM transmits current gear position signal through CAN communication). |
| NP SW SIG [On/Off] |
Indicates [ON/OFF] status as judged from park/neutral position switch signal (ECM transmits park/neutral position switch signal through CAN communication). |
| SET DISP IND [On/Off] |
Indicates [ON/OFF] status of SET switch indicator output. |
| DISTANCE [m] |
Indicates the distance from the vehicle ahead. |
| RELATIVE SPD [m/s] |
Indicates the relative speed of the vehicle ahead. |
| SIDE G [G] |
Indicates lateral G acting on the vehicle. This lateral G is judged from a side G sensor signal read by ADAS control unit via CAN communication. (The ABS actuator and electric unit (control unit) transmits a side G sensor signal via CAN communication). |
| FUNC ITEM (FCW) [On/Off] |
Indicates system which can be set to ON/OFF by selecting "Driver Assistance"→"Emergency Brake" of the integral switch: Forward Emergency Braking. |
| FUNC ITEM (BSW) [On/Off] |
Indicates system which can be set to ON/OFF by selecting "Driver Assistance"→"Blind Spot" of the integral switch: Blind Spot Warning. |
| FCW SELECT [On/Off] |
Indicates an ON/OFF state of the FCW system. The FCW system can be set to ON/OFF by selecting "Driver Assistance"→"Emergency Brake" of the integral switch. |
| BSW SELECT [On/Off] |
Indicates an ON/OFF state of the BSW system. The BSW system can be set to ON/OFF by selecting "Driver Assistance"→"Blind Spot" of the integral switch. |
| BSW/BSI WARN LMP [On/Off] |
Indicates [ON/OFF] status of Blind Spot Warning malfunction. |
| BSW SYSTEM ON [On/Off] |
Indicates [ON/OFF] status of BSW system. |
| FCW SYSTEM ON [On/Off] |
Indicates [ON/OFF] status of FEB system. |
| BSW ON INDICATOR [On/Off] |
Indicates [ON/OFF] status of BSW system ON display output. |
| SIDE RADAR BLOCK COND [On/Off] |
Indicates [ON/OFF] status of side radar with dirt or foreign materials. |
| BSW IND BRIGHTNESS [Nothing/Bright/Normal/Dark] |
Indicates status of brightness of Blind Spot Warning indicator. |
| FEB AVAILABLE COND [On/Off] |
Indicates [On/Off] available condition of FEB system. |
| EBA AVAILABLE COND [On/Off] |
Indicates [On/Off] available condition of Brake Assist system. |