FixVault
Home › Nissan-Datsun › 2015 › Sentra SL › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Manual Transmission) › Unit Disassembly And Assembly › Final Drive › Disassembly

Final Drive: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove differential side bearing inner race (clutch housing side) (1) with the following procedure.
    Fig 1: Removing Differential Side Bearing Inner Race (Clutch Housing Side)
    G04812832Courtesy of NISSAN NORTH AMERICA, INC.
    1. Set a suitable tool to differential side bearing inner race (clutch housing side).
    2. Remove differential side bearing inner race (clutch housing side) using Tool (A).
      Tool number : ST33061000 (J-8107-2)
  2. Remove final gear mounting bolts and remove final gear (1).
    Fig 2: Removing Final Gear Mounting Bolts
    G05914998Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove differential side bearing inner race (transaxle case side) (1) with the following procedure.
    Fig 3: Removing Differential Side Bearing Inner Race (Transaxle Case Side)
    G05914999Courtesy of NISSAN NORTH AMERICA, INC.
    1. Set a suitable tool to differential side bearing inner race (transaxle case side).
    2. Remove differential side bearing inner race (transaxle case side) using a suitable tool (A).
About FixVault